https - apache配置了ssl一直不生效

【字号: 日期:2022-08-06浏览:33作者:雯心

问题描述

## This is the Apache server configuration file providing SSL support.# It contains the configuration directives to instruct the server how to# serve pages over an https connection. For detailing information about these # directives see <URL:http://httpd.apache.org/docs/2.2/mod/mod_ssl.html># # Do NOT simply read the instructions in here without understanding# what they do. They’re here only as hints or reminders. If you are unsure# consult the online docs. You have been warned. ### Pseudo Random Number Generator (PRNG):# Configure one or more sources to seed the PRNG of the SSL library.# The seed data should be of good random quality.# WARNING! On some platforms /dev/random blocks if not enough entropy# is available. This means you then cannot use the /dev/random device# because it would lead to very long connection times (as long as# it requires to make more entropy available). But usually those# platforms additionally provide a /dev/urandom device which doesn’t# block. So, if available, use this one instead. Read the mod_ssl User# Manual for more details.##SSLRandomSeed startup file:/dev/random 512#SSLRandomSeed startup file:/dev/urandom 512#SSLRandomSeed connect file:/dev/random 512#SSLRandomSeed connect file:/dev/urandom 512## When we also provide SSL we have to listen to the # standard HTTP port (see above) and to the HTTPS port## Note: Configurations that use IPv6 but not IPv4-mapped addresses need two# Listen directives: 'Listen [::]:443' and 'Listen 0.0.0.0:443'##Listen 443#### SSL Global Context#### All SSL configuration in this context applies both to## the main server and all SSL-enabled virtual hosts.#### Some MIME-types for downloading Certificates and CRLs#AddType application/x-x509-ca-cert .crtAddType application/x-pkcs7-crl .crl# Pass Phrase Dialog:# Configure the pass phrase gathering process.# The filtering dialog program (`builtin’ is a internal# terminal dialog) has to provide the pass phrase on stdout.SSLPassPhraseDialog builtin# Inter-Process Session Cache:# Configure the SSL Session Cache: First the mechanism # to use and second the expiring timeout (in seconds).#SSLSessionCache 'dbm:/www/wdlinux/httpd-2.2.22/logs/ssl_scache'SSLSessionCache'shmcb:/www/wdlinux/httpd-2.2.22/logs/ssl_scache(512000)'SSLSessionCacheTimeout 300# Semaphore:# Configure the path to the mutual exclusion semaphore the# SSL engine uses internally for inter-process synchronization. SSLMutex 'file:/www/wdlinux/httpd-2.2.22/logs/ssl_mutex'#### SSL Virtual Host Context##<VirtualHost test.com:443># General setup for the virtual hostDocumentRoot '/www/web/sjy/public_html'ServerName test.com:443ServerAdmin you@example.comErrorLog '/www/wdlinux/httpd-2.2.22/logs/ssl_error_log'TransferLog '/www/wdlinux/httpd-2.2.22/logs/access_log'# SSL Engine Switch:# Enable/Disable SSL for this virtual host.SSLEngine on# SSL Protocol support:# List the protocol versions which clients are allowed to# connect with. Disable SSLv2 by default (cf. RFC 6176).SSLProtocol all -SSLv2# SSL Cipher Suite:# List the ciphers that the client is permitted to negotiate.# See the mod_ssl documentation for a complete list.SSLCipherSuite HIGH:MEDIUM:!aNULL:!MD5# Speed-optimized SSL Cipher configuration:# If speed is your main concern (on busy HTTPS servers e.g.),# you might want to force clients to specific, performance# optimized ciphers. In this case, prepend those ciphers# to the SSLCipherSuite list, and enable SSLHonorCipherOrder.# Caveat: by giving precedence to RC4-SHA and AES128-SHA# (as in the example below), most connections will no longer# have perfect forward secrecy - if the server’s key is# compromised, captures of past or future traffic must be# considered compromised, too.#SSLCipherSuite RC4-SHA:AES128-SHA:HIGH:MEDIUM:!aNULL:!MD5#SSLHonorCipherOrder on # Server Certificate:# Point SSLCertificateFile at a PEM encoded certificate. If# the certificate is encrypted, then you will be prompted for a# pass phrase. Note that a kill -HUP will prompt again. Keep# in mind that if you have both an RSA and a DSA certificate you# can configure both in parallel (to also allow the use of DSA# ciphers, etc.)SSLCertificateFile '/www/wdlinux/httpd-2.2.22/conf/2_test.com.crt'#SSLCertificateFile '/www/wdlinux/httpd-2.2.22/conf/server-dsa.crt'# Server Private Key:# If the key is not combined with the certificate, use this# directive to point at the key file. Keep in mind that if# you’ve both a RSA and a DSA private key you can configure# both in parallel (to also allow the use of DSA ciphers, etc.)SSLCertificateKeyFile '/www/wdlinux/httpd-2.2.22/conf/3_test.com.key'#SSLCertificateKeyFile '/www/wdlinux/httpd-2.2.22/conf/server-dsa.key'# Server Certificate Chain:# Point SSLCertificateChainFile at a file containing the# concatenation of PEM encoded CA certificates which form the# certificate chain for the server certificate. Alternatively# the referenced file can be the same as SSLCertificateFile# when the CA certificates are directly appended to the server# certificate for convinience.SSLCertificateChainFile '/www/wdlinux/httpd-2.2.22/conf/1_root_bundle.crt'# Certificate Authority (CA):# Set the CA certificate verification path where to find CA# certificates for client authentication or alternatively one# huge file containing all of them (file must be PEM encoded)# Note: Inside SSLCACertificatePath you need hash symlinks# to point to the certificate files. Use the provided# Makefile to update the hash symlinks after changes.#SSLCACertificatePath '/www/wdlinux/httpd-2.2.22/conf/ssl.crt'#SSLCACertificateFile '/www/wdlinux/httpd-2.2.22/conf/ssl.crt/ca-bundle.crt'# Certificate Revocation Lists (CRL):# Set the CA revocation path where to find CA CRLs for client# authentication or alternatively one huge file containing all# of them (file must be PEM encoded)# Note: Inside SSLCARevocationPath you need hash symlinks# to point to the certificate files. Use the provided# Makefile to update the hash symlinks after changes.#SSLCARevocationPath '/www/wdlinux/httpd-2.2.22/conf/ssl.crl'#SSLCARevocationFile '/www/wdlinux/httpd-2.2.22/conf/ssl.crl/ca-bundle.crl'# Client Authentication (Type):# Client certificate verification type and depth. Types are# none, optional, require and optional_no_ca. Depth is a# number which specifies how deeply to verify the certificate# issuer chain before deciding the certificate is not valid.#SSLVerifyClient require#SSLVerifyDepth 10# Access Control:# With SSLRequire you can do per-directory access control based# on arbitrary complex boolean expressions containing server# variable checks and other lookup directives. The syntax is a# mixture between C and Perl. See the mod_ssl documentation# for more details.#<Location />#SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)/ # and %{SSL_CLIENT_S_DN_O} eq 'Snake Oil, Ltd.' # and %{SSL_CLIENT_S_DN_OU} in {'Staff', 'CA', 'Dev'} # and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 # and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) # or %{REMOTE_ADDR} =~ m/^192.76.162.[0-9]+$/#</Location># SSL Engine Options:# Set various options for the SSL engine.# o FakeBasicAuth:# Translate the client X.509 into a Basic Authorisation. This means that# the standard Auth/DBMAuth methods can be used for access control. The# user name is the `one line’ version of the client’s X.509 certificate.# Note that no password is obtained from the user. Every entry in the user# file needs this password: `xxj31ZMTZzkVA’.# o ExportCertData:# This exports two additional environment variables: SSL_CLIENT_CERT and# SSL_SERVER_CERT. These contain the PEM-encoded certificates of the# server (always existing) and the client (only existing when client# authentication is used). This can be used to import the certificates# into CGI scripts.# o StdEnvVars:# This exports the standard SSL/TLS related `SSL_*’ environment variables.# Per default this exportation is switched off for performance reasons,# because the extraction step is an expensive operation and is usually# useless for serving static content. So one usually enables the# exportation for CGI and SSI requests only.# o StrictRequire:# This denies access when 'SSLRequireSSL' or 'SSLRequire' applied even# under a 'Satisfy any' situation, i.e. when it applies access is denied# and no other module can change it.# o OptRenegotiate:# This enables optimized SSL connection renegotiation handling when SSL# directives are used in per-directory context. #SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire<FilesMatch '.(cgi|shtml|phtml|php)$'> SSLOptions +StdEnvVars</FilesMatch><Directory '/www/wdlinux/httpd-2.2.22/cgi-bin'> SSLOptions +StdEnvVars</Directory># SSL Protocol Adjustments:# The safe and default but still SSL/TLS standard compliant shutdown# approach is that mod_ssl sends the close notify alert but doesn’t wait for# the close notify alert from client. When you need a different shutdown# approach you can use one of the following variables:# o ssl-unclean-shutdown:# This forces an unclean shutdown when the connection is closed, i.e. no# SSL close notify alert is send or allowed to received. This violates# the SSL/TLS standard but is needed for some brain-dead browsers. Use# this when you receive I/O errors because of the standard approach where# mod_ssl sends the close notify alert.# o ssl-accurate-shutdown:# This forces an accurate shutdown when the connection is closed, i.e. a# SSL close notify alert is send and mod_ssl waits for the close notify# alert of the client. This is 100% SSL/TLS standard compliant, but in# practice often causes hanging connections with brain-dead browsers. Use# this only for browsers where you know that their SSL implementation# works correctly. # Notice: Most problems of broken clients are also related to the HTTP# keep-alive facility, so you usually additionally want to disable# keep-alive for those clients, too. Use variable 'nokeepalive' for this.# Similarly, one has to force some clients to use HTTP/1.0 to workaround# their broken HTTP/1.1 implementation. Use variables 'downgrade-1.0' and# 'force-response-1.0' for this.BrowserMatch 'MSIE [2-5]' nokeepalive ssl-unclean-shutdown downgrade-1.0 force-response-1.0# Per-Server Logging:# The home of a custom SSL log file. Use this when you want a# compact non-error SSL logfile on a virtual host basis.CustomLog '/www/wdlinux/httpd-2.2.22/logs/ssl_request_log' '%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x '%r' %b'</VirtualHost>

上面是配置

环境是wdcp,用的apache服务器

错误日志没有内容

https访问一直失败

问题解答

回答1:

建议看下这篇文章Windows下Apache配置SSL以支持https及出错的解决办法,应该能解决你的问题。

相关文章: